Full Face Armored Version

• Plastic face covers the whole form to the tool.
• Compatible with the Leatherman Lanyard Loop.
• Not compatible with the pocket clip or barnacle bit holder attached
• Also compatible with the FREE P4 (Without lanyard loop or pocket clip)
• Compatible with the PC Doodle LED Flashy, with some interference.

Note: The description, image and price below changes based on the selected options. 

My profit is fixed. Price changes are due to Shapeways pricing and the part volume.

#OpenClip

Open Clip: 

• For light duty use only. 
• 48x5mm (1.9x0.2in) open belt clip.
• 4 bit holders on the back.
• Allows for holster to be attached on without taking off belt.
• Fits regular, and Air Force DLATS Belts (BDU) style belts.

#BDULoop

BDU Loop

• 48x5mm (1.9x0.2in) closed belt loop.
• 7 Bit holders on the back
• Closed loop is stronger than open clip.
• Fits regular, and Air Force DLATS Belts (BDU) style belts.
• Also attaches to PALS webbing. MOLLE Compatible.
• Features keyhole for hanging on a hook/nail.

#DutyLoop

Duty Loop

• 58x7mm (2.28x0.27in) closed belt loop.
• 6 Bit holders on the back
• Fits large, and Duty style belts.
• Also attaches to PALS webbing. MOLLE Compatible.
• Features keyhole for hanging on a hook/nail.

#HorizontalLoop

Horizontal Carry Loop

• 48x5mm (1.9x0.2in) closed horizontal belt loop
• No bit holders on the back (Need room for the belt)
• Left or right hand carry
• Fits regular, and Air Force DLATS Belts (BDU) style belts
• Two bit holders on one side (More if no extender option is selected)

#ThirdPartyClipCompatible

Third Party Clip Compatible:

• Third Party Clip and screws are not included
• #8 Chicago screw holes fits third party clips.
• Hole and Slot spacing from 0.5” to 1.3”
• 7 Bit holders on the back
• The metal clip shown is the TheClip.com, Model 661BP. You may get similar models from Amazon.com here.
• Recommend Tandy Leather, Screw Post Model 1296-04 (1/8" long)
• Also compatible with Tek-Lok Regular and Small

#WithSideGrips

Side Grip options:

• Holder for the Leatherman Ratchet, Bit Extender, or 711L Flex Head on the side
• The other side holds up to 4 extra bits
• Can also hold the 711L ratchet wrench
• Can also hold the Volty Bit or the Volty Switch
• The fit will be tight at first, but wear in with use.

#SlimNoSideGrips

Slim, no side grips option:

• No side grips or side bit holders
• Slimmer overall profile

#All

Features:

• Ultra slim and light design.
• Multiple attachment styles available.
• The tool is is held in place using the two spring-loaded release tabs built into the multitool.

Regarding the Pocket Clip:

The holster is NOT compatible with the pocket clip still attached to the ARC. To remove the pocket clip from the Leatherman ARC you need a Torx T6 driver.

If you wish: can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws. 

What am I getting / not getting?:

Included:

● One (1x) 3D printed belt holster made from Nylon 12

Not included:

● Tool or other accessories.

● Accessories are shown in the images only as example use case only.

#ThirdPartyClipCompatible

● Metal Clip or Tek-Lok products

● Chicago Screws

Other colors

You can paint or dye the white Nylon 12 material any color you wish. I have found matte enamel spray paints to work well. (Use a few light coats)

Any nylon compatible fabric dye can also be used. 

#Black

Black Touch Up Pen:

I recommend the Molotow ONE4ALL Acrylic paint marker for any touch ups.