Holster for the Leatherman Garage #005
Regular price $58.00Note: The description below changes based on the selected options.
Note the design has been updated to match the ARC, but the renderings are not yet updated. Changes: New ratchet holder, longer central grip.
#OpenClip
Open Clip:
- Recommended for light duty use only. Select a closed loop for strength.
- 48x5mm (1.9x0.2in) open belt clip.
- Allows for holster to be clips on without taking off belt.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
- Four bit holders on the back
#BDULoop
BDU Loop
- 48x5mm (1.9x0.2in) closed belt loop.
- Closed loop is stronger than open clip.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
- 7 Bit holders on the back
#DutyLoop
Duty Loop
- 58x7mm (2.28x0.27in) closed belt loop.
- Fits large, and Duty style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
#HorizontalLoop
Horizontal Carry Loop
- 48x5mm (1.9x0.2in) closed horizontal belt loop
- Left or right hand carry
- Fits regular, and Air Force DLATS Belts (BDU) style belts
#ThirdPartyClipCompatible
Third Party Clip Compatible:
- Third Party Clip not included
- Chicago screw holes fits third party clips.
- The metal clip shown is the TheClip.com, Model 661BP. You may get similar models from Amazon.com here.
- Recommend Tandy Leather, Screw Post Model 1296-04 (1/8" long)
- Also compatible with Tek-Lok Regular and Small
- 4 Bit holders on the back
#NoneExtraBits
- This is the No Belt, Maximum Bit Holders variant
- Does not fit any belts, and is meant for use with a tool bag
#WithSideGrips
Side Grips option:
- Holder for the Leatherman Ratchet or Bit Extender on the side
- Other side holds up to 4 extra bits, or 2 bits + the 711L ratchet wrench
- Fit will be tight at first, but wear in quickly with use
- Accessories not included
#SlimNoSideGrips
Slim, no side grips option:
- No side grips or side bit holders
- Slimmer overall profile
#All
Features:
- Ultra slim and light design.
- Multiple attachment styles available.
- The tool is is held in place using the two spring-loaded release tabs built into the multitool.
- The whole face of the tool exposed for a unique and stylish look.
- A channel down the center allows you to remove the tool using just one hand.
Design details:
The tool was recreated using professional CAD software. No detail was spared. The holster was then designed to form fit around the tool. This design is an expansion of my proven FREE series holsters with improvements to every aspect of the design.
Many physical prototypes were made testing each aspect of the design.
Regarding the Pocket Clip:
Unfortunately, the holster is not compatible with the pocket clip.
To remove the pocket clip from the Leatherman Garage #5 you need a Torx T6 driver. If you want: can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws.
What am I getting / not getting?:
Included:
● One (1x) 3D printed belt holster made from Nylon 12
Not included:
● Tool, thumb-tabs, bit extender or other accessories.
● Accessories are shown in the images only as example use case only
#ThirdPartyClipCompatible
● Metal Clip or Tek-Lok products
● Chicago Screws
Other colors
Some other colors such as Pink, Purple, or Yellow can be made available. Due to Shopify limitations, not all colors were listed. Message me before ordering if you want one of these.
How Shapeways fulfillment Works:
Many items on this website are manufactured by Shapeways.com
The parts are professionally 3D printed, and then drop shipped to your address.
I cannot customize, alter or process any returns after your order has been placed. All sales are final.
Items destined for a US address are made in the USA either in Michigan or New York. International shipments may be produced in either the USA or Netherlands.
ZapWizard is the part designer. I receive a fixed portion of the total order.
Upon order you will receive a confirmation of the order, and a notification upon shipment. If you need more details on the state of an item please send me a message with the order number, or place your order directly on my Shapeways.com store.
All items in the US are shipped using UPS Mail Innovations. This means your shipment will be transferred your local carrier for final delivery. If you require faster shipping or international shipping: Please order directly from the Shapeways.com marketplace.
Shipping costs and any other related fees related to Shapeways are controlled by Shapeways.com. For more information please see the Shapeways.com page on shipping time and costs.
Shapeways.com provides a 10-day warranty for manufacturing defects. Please contact me as soon as possible if you have any defects such as a warped metal part, or heavily filled area. Please include your order number and a photo of the defective part.
Parts are made in Michigan, New York or the Netherlands depending on final shipping location.
About the material:
Made from flexible yet strong Nylon 12 plastic. The part is created using 3D printed laser sintered plastic. The result is a solid plastic component that is durable and long-lasting.
Like all nylon materials the part can absorb moisture. Care should be taken to prevent prolonged exposure to liquids. Dry the part as soon as possible to prevent warping.
Custom Colors:
If you want a color not available above: You can dye the parts using any colored permanent marker. Simply order the thumb tabs in white, and color them yourself. The surface is slightly porous and will hold color well. They may also be dyed using any fabric dye compatible with Nylon (Polyamide).
