RGT Skins for the Leatherman ARC

These are made by Ripp's Garage Tech LLC, and ship with your ZapWizard.com order.

Features:

• Made from tough Codura 
• 500D is a grippy but fine texture
• 1000D has a larger pattern
• Both materials are the same thickness
• High Quality 3M 300LSE Adhesive
• Grippy texture
• Laser Cut
• Four skin components to cover your entire ARC
• Cutouts for the screw holes in the face of the tool
• Alcohol prep pad included

The exact pattern you receive will vary. Parts are cut from larger sheets. Not responsible for color accuracy on your particular screen.

Compatibility:

• Compatible with ZapWizard.com holsters sold on/after March 1st 2025
• To check if you have a new holster, look for the word "Zap" on the inside of the holster.
• Fits inside older holsters, but may scrape/fray a bit near the spring tabs.
• I am offering 50% off a new holster for any existing customers. See the skin upgrade section below.

#RubberGripBlack500D #RubberGripMoss500D

Rubber Grip:

The rubber grip items are made from textured rubber instead of Codura

Attaching the skins:

Skin Application Help Video

1. You will need to remove the belt clip or any other accessories attached to the ARC pocket clip holes. I sell a Torx T6 bit for this purpose.
2. Clean the scales with the included alcohol prep pad.
3. Sometimes it's hard to get the adhesive to separate from the backer and it can come off the Cordura. In this case just stick it back together and try a different spot. To remove skins, use your fingernail, exacto knife or tool of choice carefully to  bring up the edge of the material and adhesive together. The rest should then peel off very smoothly.
4. You then line up the tool's screw with the holes on the skin. Do not press down firmly on the skin just yet. 
5. Line up the skin with the other pivot screw, again, not pressing firmly at this time in case you would need to make some adjustments. 
6. Make sure the rest of the skin is lined up with the outer edges, lanyard tubes, clip holes etc then you can smooth out the skin and apply pressure for it to stay in place. 
7. If you notice is covering the pivot screw, clip screw or is a little off you are able to slide the skin a little bit to get it better aligned, by apply some pressure and pushing in the direction it needs to go.

Removing the skins:

If you want to remove the skins from the tool, you can peel it away from the surface. Any remaining adhesive can be cleaned up with a small amount of WD40. Fully degrease the surface before attempting to attach a new skin.

Flashy Cut Modification:

Because the RGT skins cover the conductive surface of the tool: If you want to attach a PC Doodle Flashy you will need to use thin copper tape under the Flashy to make contact.

I also offer the "Flashy Cut" option, I will laser-cut one of the skins such that it perfectly fits the PC Doodle Flashy. I suggest using the copper tape method unless you want the light more recessed.

Laser the edges of the Codura prevents fraying. The off-cut will still be included if you wish to undo the modification. The $3 upcharge for this service covers the labor to cut your item. You must add this item to your cart separately.

Skin Upgrade:

If you already have an older ZapWizard ARC Holster and want to upgrade to a newer design that is skin compatible. Use the code: SKINUPGRADE at checkout. Must be logged in using the same email as your previous order to see the discount.

Support and help:

Please contact rippscnc@gmail.com for support and warranty on RGT skins.