This modification adds a hair comb to your Leatherman ARC, FREE P4, P2, or Garage #005
Now with new laser etched ruler option!
- 430 Stainless Steel (Magnetic)
- The same material series as the ARC tools
- Tumbled for a smooth finish
- 0.073" Thick
- An every day carry comb you can keep on your multitool.
Optional Laser Etched Ruler:
For a bit extra, add a laser etched ruler to your comb!
Choose from 4 ruler variants:
- Metric Only: Both sides with millimeter increments.
- Inch Only: Both sides with 1/16" increments.
- Metric Primary: One side metric, one side inch.
- Inch Primary: One side metric, one side inch.
The rendered image changes as you make your selection. Please refer to it for which side is primary. (As it depends on your install location).
Suggested configurations:
- ARC, Replacing the Can Opener:
- Remove the Can Opener on a Leatherman ARC
- Place the comb on the outside, next to the Saw
- ARC, Replacing the Saw
- ARC, Replacing the File
- FREE P4, Replacing the Saw
- Garage #005, Replacing the Saw
- Garage #005, Replacing the File
Installation:
The tool must be taken apart to install this modification. Any warranty concerns are entirely up to the user. See the video above for a how to.
- You will need two Torx T9 bits to remove the screws holding the tool together.
- The screws need to be loosened by holding one side with a bit, and turning the other side.
- The screws are secured using thread-locking compound, and heat may be required to loosen the compound.
- Care should be taken to open the tool on a clean surface.
- Keep the thick washer between the scales and the comb.
- The tightness of the tool will depend on the amount of torque you apply during reassembly.
What am I getting / not getting?:
This list will update depending on the options selected
Included:
● One comb
One free ZapWizard.com, 1:1 scale sticker of the Leatherman ARC.
Not included:
● Leatherman Tool or other accessories
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe
Products marked with “ZapWizard Design” at the top of the product description are Made in the America from US and global materials.
Manufacturing occurs in Austin Texas.
Where possible hardware items such as screws are sourced from US suppliers such as McMaster-Carr.
Products marked with “PC Doodle” are manufactured in Minnesota. See PCDoodle.com for any specific claims.
Products marked with "RGT" are manufactured in Wisconsin. See rippsgaragetech.com for any specific claims.
Some community items and Amazon linked items may be sourced globally.
