Holster for the Leatherman ARC - Armored Front Bits

New lower price (Grey only)

Full Face Armored Version, with Extra Front Bit Slots

• 11 Extra bit slots on the front of the holster
• Warning: Front bits present a snag hazard to clothing.
• Plastic face covers the whole front of the tool.

Note: The description, image and price below changes based on the selected options. 

#BDULoop

BDU Loop

• 48x5mm (1.9x0.2in) closed belt loop.
• 7 More bit holders on the back
• Closed loop is stronger than open clip.
• Fits most regular, and Air Force DLATS Belts (BDU) style belts.
• Also attaches to PALS webbing. MOLLE Compatible.
• Features keyhole for hanging on a hook/nail.

#DutyLoop

Duty Loop

• 58x7mm (2.28x0.27in) closed belt loop.
• 6 More bit holders on the back
• Fits larger, and Duty style belts.
• Also attaches to PALS webbing. MOLLE Compatible.
• Features keyhole for hanging on a hook/nail.

#HorizontalClosedLoop

Horizontal Carry, Closed Loop

• 48x5mm (1.9x0.2in) closed horizontal belt loop
• No bit holders on the back (Need room for the belt)
• Left or right hand carry
• Fits regular, and Air Force DLATS Belts (BDU) style belts

#HorizontalLeftHandOpenClip

Horizontal Carry, Left Hand Carry, Open Clip

• 48x5mm (1.9x0.2in) open horizontal belt loop
• Tool sit on your left side.
• Ratchet driver / Bit extended is on the top
• No bit holders on the back (Need room for the belt)
• Fits regular, and Air Force DLATS Belts (BDU) style belts

#HorizontalRightHandOpenClip

Horizontal Carry, Right Hand Carry, Open Clip

• 48x5mm (1.9x0.2in) open horizontal belt loop
• Tool sit on your right side.
• Ratchet Driver / Bit Extender is on the bottom
• No bit holders on the back (Need room for the belt)
• Fits regular, and Air Force DLATS Belts (BDU) style belts

#ThirdPartyClipCompatible

Third Party Clip Compatible:

• Metal clip sold separately
• Top-mount Chicago screw hole placement.
• Can also attach to other third party clips that have in-line holes.
• #8 Chicago screw holes fits third party clips.
• Spacing from 0.5” to 1.3”
• 7 Bit holders on the back

#All

Common features:

• ·Compatible with the Leatherman Lanyard Loop.
• ·Not compatible with the pocket clip or barnacle bit holder attached
• ·Also compatible with the FREE P4 (Without lanyard loop or pocket clip)
• ·Compatible with the PC Doodle LED Flashy, with some interference.
• ·Holder for the Leatherman Ratchet, Bit Extender, or 711L Flex Head on the side
• ·The other side holds up to 4 extra bits
• ·Can also hold the 711L ratchet wrench
• ·Can also hold the Volty Bit or the Volty Switch
• ·The fit will be tight at first, but wear in with use.
• ·Multiple attachment styles available.
• ·The tool is is held in place using the two spring-loaded release tabs built into the multitool.

Regarding the Pocket Clip:

This variant is NOT compatible with the pocket clip still attached to the ARC. To remove the pocket clip from the Leatherman ARC you need a Torx T6 driver.

If you wish: can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws. 

What am I getting / not getting?:

Included:

● One (1x) 3D printed belt holster made from Nylon 12

Not included:

● Tool or other accessories.

● Accessories are shown in the images only as example use case only.

#ThirdPartyClipCompatible

● Metal Clip or Tek-Lok products

● Chicago Screws

Other colors

You can paint or dye the white Nylon 12 material any color you wish. I have found matte enamel spray paints to work well. (Use a few light coats)

Any nylon compatible fabric dye can also be used. 

#Black

Black Touch Up Pen:

I recommend the Molotow ONE4ALL Acrylic paint marker for any touch ups.