Holster for Leatherman Free P2
Regular price $50.00 Sale price $40.00New Lower Price (Grey only)
This holster is designed to fit a modified Leatherman Free P2 Multitool.
If you don't want the bit-grips in the back, click here.
Note: The Bit Extender models are not compatible with the Leatherman Ratchet Driver.
Click here for the Ratchet Driver compatible holster.
#BDULoop
BDU Loop
- 48x5mm (1.9x0.2in) closed belt loop.
- Closed loop is stronger than open clip.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
#DutyLoop
Duty Loop
- 58x7mm (2.28x0.27in) closed belt loop.
- Fits large, and Duty style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
#MetalClipCompatible
Metal Clip Compatible:
- Metal clip sold separately
- Top-mount Chicago screw hole placement.
- Can also attach to other third party clips that have in-line holes.
#All
Features:
- Ultra slim and light design.
- Multiple attachment styles available.
- The tool is is held in place using the two spring-loaded release buttons built into the multitool.
- Tool can be inserted with the springs facing up or down.
- The whole face of the tool exposed for a unique and stylish look.
- A channel down the center allows you to remove the tool using just one hand.
Design:
Before design, the tool was recreated using professional CAD software. No detail was spared. The holster was then designed to form fits around the tool. Seven different prototypes were created to perfect the fit and feel. Features were added along the way, such as the ability to insert the tool in any orientation.
Pocket Clip:
To remove the pocket clip from the Leatherman FREE you need a Torx T6 driver. You can then fill in the holes left behind by using two tiny #2-56 x 1/16"L Set Screws.
If you want to leave the pocket clip attached to the tool, you may do so, but the tool will need to be docked with the clip facing away from your body.
Bit holder tightness:
The bit holders are quite tight when the part arrives.
For the 4mm bit grips, you can insert a 4mm or 5/32" allen key and rotate it around to exercise the bit holders and loosen them up a bit.
For the flat bits, simply pushing the bits through a few times should loosen then up.
What am I getting / not getting?:
Included:
● One 3D printed belt holster
Not included:
● Tool, thumb-tabs, bit extender or other accessories.
#MetalClipCompatible
● Metal Clip
● Chicago Screws
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe