Barnacle Bit Holder for the Leatherman ARC and Garage #005
Regular price $16.00 Sale price $8.00Now half the price! (Grey color only)
One (1x) bit holder per order.
Features:
- Compact single bit holder for Leatherman Flat Bits
- Slim 5.2mm thick
- Bit can be removed in either direction
#Snap
- Compatible with the Garage #005 only
- I recommend backing it up with removable rubber or hot melt adhesive.
#Screw
- Compatible with the Leatherman ARC, FREE P4 or Garage #005
- Replaces the pocket clip, uses the same screws that attach the pocket clip.
- Not compatible with my Garage #005 holster due to the pocket clip location, but it is compatible with my ARC holsters.
- Two extra screw holes in case you over tighten the screws and need to flip it around.
- 2 Screws are now included!
Design:
Another customer requested product.
#Snap
This slim bit holder fits perfectly into the three cutouts on the scales of the Garage #005. Six snap fit tabs hold in place. You can install one on each side of the tool if you wish.
What am I getting / not getting?:
Included:
● One (1x) 3D printed bit holder made from Nylon 12, Grey Color
#Screw
Not included:
● Tool, Bit, Adhesive, or other accessories.
● Accessories are shown in the images only as example use case only
What am I getting / not getting?:
Included:
● One (1x) 3D printed bit holder made from Nylon 12, Grey Color
#Screw
● 2x Screws
Not included:
● Tool, Bit, or other accessories.
● Accessories are shown in the images only as example use case only
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe