The text below changes depending on your selections
Pocket Clip compatible armored variant
- New design no longer has holes in the front face
- Plastic face covers the front of the tool, with room for the pocket clip
- Compatible with the Pocket Clip still attached, but it must moved to the blade side of the tool!
- Compatible barnacle bit holder attached
- Not compatible with the Victorinox Holder
- Not compatible with the FREE P4 (Unless pocket clip is removed, or modified to be on the blade side)
- Compatible with the PC Doodle LED Flashy (When installed on the blade side in place of the belt clip)
Note: The description below changes based on the selected options. The price will also change depending on your selection.
The images also update, each variant is rendered, check the images to double check the options your selected.
#BDULoop
BDU Loop
- 48x5mm (1.9x0.2in) closed belt loop.
- Closed loop is stronger than open clip.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
- Features keyhole for hanging on a hook/nail.
- 7 Bit holders on the back
#DutyLoop
Duty Loop
- 58x7mm (2.28x0.27in) closed belt loop.
- Fits large, and Duty style belts.
- Features keyhole for hanging on a hook/nail.
- 6 Bit holders on the back
#HorizontalLoop
Horizontal Carry Loop
- 48x5mm (1.9x0.2in) closed horizontal belt loop
- Left or right hand carry
- Fits regular, and Air Force DLATS Belts (BDU) style belts
- Two bit holders on one side (More if no extender option is selected)
- No bit holders on the back (Need room for the belt)
#ThirdPartyClipCompatible
Third Party Clip Compatible:
- Belt clips sold separately
- Top-mount Chicago screw hole placement.
- Can also attach to other third party clips that have in-line holes.
- #8 Chicago screw holes fits third party clips.
- Spacing from 0.5” to 1.3”
- 7 Bit holders on the back
#None-Slim
None-Slim
- No belt or other attachments
- Slim protective case only
#WithSideGrips
Side Grip options:
- Holder for the Leatherman Ratchet or Bit Extender, or 711L Flex Head on the side
- The other side holds up to 4 extra bits
- Can also hold the 711L ratchet wrench
- Can also hold the Volty Bit or the Volty Switch
- The fit will be tight at first, but wear in with use.
#SlimNoSideGrips
Slim, no side grips option:
- No side grips or side bit holders
- Slimmer overall profile
#All
Features:
- Ultra slim and light design.
- Multiple attachment styles available.
- The tool is is held in place using the two spring-loaded release tabs built into the multitool.
What am I getting / not getting?:
Included:
● One (1x) 3D printed belt holster made from Nylon 12
Not included:
● Tool or other accessories.
● Accessories are shown in the images only as example use case only.
#ThirdPartyClipCompatible
● Metal Clip or Tek-Lok products
● Chicago Screws
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe
Products marked with “ZapWizard Design” at the top of the product description are Made in the America from US and global materials.
Manufacturing occurs in Austin Texas.
Where possible hardware items such as screws are sourced from US suppliers such as McMaster-Carr.
Products marked with “PC Doodle” are manufactured in Minnesota. See PCDoodle.com for any specific claims.
Products marked with "RGT" are manufactured in Wisconsin. See rippsgaragetech.com for any specific claims.
Some community items and Amazon linked items may be sourced globally.
