Wera Tool Check Mini Plus Add-ons
Regular price $20.00Your current selection (This text changes!):
#RapidatorOnly
Rapidator Only
- Click here for the video
- Holder for the Were Rapidator only
#CobraXSandLEDlight
Knipex Cobra XS and LED light
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra XS (4")
- Holster for the Klarus E5 LED light
- Two magnets and pin includded!
- 3/16" magnet goes into the hole to hold the pliers
- 1/8" magnet goes into the end of the flashlight slot
- Stainless Steel pin to hold the hinge
#CobraXS
Cobra XS
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra XS (4")
#CobraMini
Cobra Mini
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra Mini (5")
#CobraMiniandLEDLight
Cobra Mini and LED Light
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra Mini (5")
- Holster for the Klarus E5 LED light
- Spacer Ring
#CobraMiniandLEDLightandKnife
Cobra Mini and LED Light and Knife
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra Mini (5")
- Holster for the Klarus E5 LED light
- Holster for Victorinox Swiss Army Knife 7
#CobraXSandLEDLightandWave
Cobra XS and LED Light and Wave
- Click here for the video
- Holder for the Were Rapidator
- Holder for the Knipex Cobra XS (4")
- Holster for the Klarus E5 LED light
- Holster for the Leatherman Wave
- Include the magnets and steel pin
- The small cage has the magnet covers inside.
#All
A community printed part. Profits shared with Stein3DConcepts.
This is a add-on for the Wera Tool Check Mini from the Wera Advent Calendar 2024.
Does not fit other Wera kits. Tools are not included.
Professionally printed in SLS Nylon. (Grey is the default color, black dying available for an extra cost)
The add-on can be inserted at the front or back on the right or left side. To change sides, the bit holder may have to be moved to the other side. As shown, it is mounted at the front left or back right. Select the Mirrored option to flip the parts before printing.
Tip: To ensure that the lamp's magnet stays in place better, you can press a small metal pin with a diameter of 3 mm and a length of approx. 10 mm into the small recess in the slot.
Thin double sided tape, such as Woodwokring Tape can be used to hold the bit changer cover in place. This tape is not included.
Can I print it myself?
If you want to 3D print the parts to print yourself, you can find them at:
https://www.etsy.com/listing/1844837759/
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe
