BNC Connector Clips
Regular price $2.00Design:
#Locking
BNC connectors are good for quickly connecting and disconnecting cables. This can also lead to situations where accidental disconnection is possible, either due to heavy vibration, or simply from a technician disconnecting the wrong cable at the wrong time.
This simple c-style clip snaps onto regular BNC connectors and locks the bayonet pins into place. Preventing the BNC cable from disconnection without first removing the band. For extra security a common zip style wire tie can be added to provide extra security.
Use colored zip-ties to color code cables!
The tabs have a knurled surface to provide a good grip during installation. The nylon Color is heat resistant, strong, and long lasting. The clips are fully reusable.
#NonLocking
These are free-spinning bands that snap onto the BNC connector.
Meant for identification. You can paint them using any plastic compatible spray paint for a custom color marking.
Use colored zip-ties to color code cables!
Quantity:
Sold in pairs
Attaching the clips:
#locking
- Each clip has a small arrow on the top. Orient the arrow towards the end of the connector without a cable protruding from it. (Or towards your equipment)
- If the connectors are already mated: Snap the clip onto the connector and then rotate in a clockwise direction until the clip fully snaps into place.
- If the connectors are not yet mated: You can pre-attach the clip to the end of the cable, but be sure it is loosely attached and not in the locked position. Then after attaching the cable, rotate the clip clockwise until locked.
- For extra security: Add a small zip style wire tie to the outside of the clip. Use colored zip-ties to color code cables!
Removing the clip:
#Locking
To remove the clip, cut away any wire tie you may have in place. Then use a small flat head screw driver or your fingernail to lift one side of the clip and pry it away. The clips are reusable.
What am I getting / not getting?:
This list will update depending on the options selected
Included:
#Locking
● One pair of 3D printed BNC locking clips
#NonLocking
● One pair of 3D printed BNC non-locking clips
#All
Not included:
● BNC Cables
● Zip Ties
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe
