Flashlight Backpack 3.0 for Leatherman ARC - PC Doodle

Items made by PC Doodle now ship with your ZapWizard.com order!

Add a Burst of Light to Your Leatherman ARC.

This super slim flashlight backpack (4mm Height) can provide up to a sustained 5 Hours at maximum brightness.

Compatibility:

Compatible with Zap's ARC holsters (Only when installed on the blade side)

Due to the coating on the ARC Obsidian:  Functionality is not guaranteed with this model. The coating is has some electrical resistance. You results may vary, purchase at your own risk.

Features:

90 Degree Horizontal Spill: Perfect for checking a bag, checking a fuse, inserting keys into a lock or any task where you need some discreet, close up illumination. 

3M Backed Water Resistant Membrane Overlay: The membrane covers the gold plated button pads. The buttons are flush and the activation force is a hard press so it won't accidentally light up in your sheath or pocket. Let the membrane adhesive cure for 24 hours before subjecting flashy to damp environments. See: Pressure Sensitive Adhesives.

Front facing LED:  The front LED allows you to hold your ARC like a flashlight, with the tool open Flashy illuminates the pliers area. Hold your arc upside down for walking path illumination (gets you more ground coverage due to the large pivot screw on the arc blocking some light).

Rear facing LED: Illuminate the ground without removing the ARC from your belt. Due to occlusion, the LEDs do not directly illuminate the folding tools of the ARC.

Above: The LED will not directly light up the folding tools unless there is a nearby surface to reflect light.

Below: the "rear" LED can illuminate the ground while attached to your hip.

Batteries:

Batteries Included: 2 High Discharge Silver Oxide Cells Included. (Replace with Energizer 377/376 Multi Drain)

If you have trouble getting the batteries out, fully remove the screws from Flashy and use the small opening to insert your ARCs precision driver to assist in battery extraction.

The batteries directly contact the surface of your ARC to complete the series circuit: in our tests the battery cans are the softer material so it should not scuff up your tool. Long term testing has not been done.

Operation:

Installation:

Screws Included: Four mounting screws included.