Holster for Leatherman Charge Plus & G10
Regular price $50.00 Sale price $35.00New lower price (Grey only)
The text below changes depending on your selections
This holster is designed to fit the Leatherman Charge+ and Charge+ TTI and the Charge G10 Multitool.
Note: The Bit Extender models are not compatible with the Leatherman Ratchet Driver.
#LeftHandCarry #RightHandCarry #HorizontalLoop
Cross-drawing:
Order a "Left side carry" if you want to cross-draw with your right hand.
Order a "Right side carry" if you want to cross-draw with your left hand.
Order a "Horizontal Loop" if you want a stronger closed belt loop. You can cross-draws from either side with this variant.
- 48x5mm (1.9x0.2in) closed belt loop.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
#BDULoop
BDU Loop
- 48x5mm (1.9x0.2in) closed belt loop.
- Closed loop is stronger than open clip.
- Fits regular, and Air Force DLATS Belts (BDU) style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
#DutyLoop
Duty Loop
- 58x7mm (2.28x0.27in) closed belt loop.
- Fits large, and Duty style belts.
- Also attaches to PALS webbing. MOLLE Compatible.
- Features keyhole for hanging on a hook/nail.
#TekLokCompatible
Tek-Lok Compatible:
- Compatible with Tek-Lok holders.
- Fits Regular, Small and MOLLE small Tek-Lok Models.
- Allows for angled and horizontal mounting.
- Can also attach to other mid-mount Chicago screw style products.
- Also compatible with the Combat loop belt clip.
#ThirdPartyClipCompatible
Third Party Clip Compatible:
- Belt Clips sold separately
- Top-mount Chicago screw hole placement.
- Can also attach to other third party clips that have in-line holes.
Features:
- The tool is is held in place using the two spring-loaded release buttons built into the multitool.
- A channel down the center allows you to remove the tool using just one hand.
- Ultra slim and light design. Less than one ounce. 0.91oz (26g)
How it was designed:
After receiving a few requests for a holster compatible with the Charge TTI, I bought a TTI and got to work. With the titanium scales, I assumed that it would be lighter than the Wave. However the Charge TTI is actually thicker and heavier than the Wave. (0.54lbs versus 0.52lbs). But at least the blade is a stronger type of steel.
I have had owners report that it also fits the Charge Plus and G10
This holster was designed from scratch, following the same methods as my Wave Holster. The tool was carefully measured and a highly accurate 3D model was made. Then in professional CAD software I designed the holster around the tool. The face of the holster is flush with the edges of the tool, allowing the raised brushed metal on the tool to remain a nice accent feature.
What am I getting / not getting?:
This list will update depending on the options selected
Included:
#BDULoop
● One 3D Printed holster with closed BDU Loop
#DutyLoop
● One 3D Printed holster with closed Duty Loop
#MetalClipCompatible
● One 3D Printed holster with holes that allow attachment of a metal clip
#OpenClip
● One 3D Printed holster with a open plastic clip
#LeftHandCarry
● One 3D Printed holster, horizontal carry, left hand side, with a open plastic clip
#RightHandCarry
● One 3D Printed holster, horizontal carry, right hand side, with a open plastic clip
#WithExtender
● A built-in grip for the Leatherman Bit Extender
#All
Not included:
● Leatherman Tool
● Leatherman Bit Extender Accessory
● Driver Bits
#NoExtender
● Built-in Bit Extender Holder
#MetalCLip
● Metal Belt Clip
● Chicago Screws
- The natural color of the Nylon 12 SLS power is gray.
- This material will darken slightly and smooth out with use.
- Dying may be added for an additional cost (Click here).
The nylon material can be dyed or painted.
- Dying:
- Rit Dye or any Nylon fabric dye may be used.
- It is not possible to make the colors brighter with dye.
- Black, Dark green, Dark Red, Dark blue may be achieved
- Painting:
- Any plastic compatible paint may also be used, apply in very thin light coats until completely covered. Heavy application may affect tolerances.
- I have found Ace Hardware Matte Enamel paints to work particularly well.
Natural grey color -vs- black dyed
Most 3D printed parts are printed on demand
The process:
Batches of up to 15 holsters or other similar sized items are printed, taking up to 20 hours per batch. The parts are then cleaned, and made ready for packing.
The material:
Professionally 3D printed SLS Nylon 12 Plastic.
- Solid part, no hollow or plastic toy feel
- Material is flexible and water resistant
- Durable and long lasting
- Temperature and chemical resistant
- Ductile and environmentally stable
- Skin safe
Don't know what belt option is right for you?
BDU Loop:
- Opening size: 48x5mm or 1.9" x 0.2"
- A closed oblong shaped loop
- This fits most regular open ended belts
- Fits regular Air Force DLATS belts
Duty Loop:
- Opening size: 58x7mm or 2.28" x 0.27"
- A closed oblong shaped loop
- This fits most police style duty belts
- Also fits extra thick belts or many belts with dual clasps. (Groove belts or similar)
Horizontal Carry Loop:
- Same specifications as the BDU loop.
Third Party Clip Compatible:
- Designed to allow a separate belt clip product to be attached to the holster.
- A hole and slot configuration
- Hole and slot spacing from 0.5” to 1.3”
- Fits #8 Chicago screws
- Most clips require a 1/8" long screw/nut configuration
- I sell various compatible clips:
Tek-Lok Compatible:
- Similar to Third Party except with more room on the back for larger Tek-Lok products.
